It can be challenging to decide between an industrial vacuum and a dust collector as a control measure for silica dust. When choosing, there are several factors that you must consider such as the current area of application, environmental conditions, the type of dust being produced, and the contaminants present in the dust. When it comes to the type of dust, the question is whether the dust to be controlled is volatile or accumulates on the surface. If you can answer that question, you ca which tool between a vacuum and a dust collector is best suited for your needs.

That said; let us have a look at

The differences Between an Industrial Vacuum and Dust Collector

Suction Power

The primary distinction between vacuum systems and dust collectors is that the former uses the Low Volume, High Pressure (LVHP) principle, while the latter use the High Volume, Low Pressure (HVLP) principle (HVLP). Due to the high pressure, vacuums can transport heavier particles — those that gather on various surfaces—to the collection container. On the other hand, a dust collector is made to capture airborne particles using massive airflows but will not pick up the heavier particles due to their low pressure. Vacuums remove dust from the air, and dirt from floors, walls, equipment enclosures, and bulk heaps beneath conveyors and transfer points. An operator tool like a dusting brush is typically used to help a vacuum machine collect dust. It transfers it via a pipe with a tiny inner diameter to the air/material receiver separator. Dust collectors are better suited to collect dust clouds produced by fine particles.

Area of application

In production areas where dust is removed from floor surfaces and equipment, industrial vacuum cleaners are a suitable and effective solution for collecting, maintaining, and cleaning. decide Contrarily, industrial dust collectors are made to weigh, pour, or move raw materials like cement while also collecting suspended dust. An industrial vacuum cleaner is a good solution if materials and contaminants accumulate on a surface. However, you’ll need an industrial dust collector if the pollutants are floating in the air. As such, pay attention to the type of pollutants and their volume when deciding between industrial vacuum cleaners and dust collectors. This means, if the dust is volatile, you’ll need a dust collector, but if it sticks to the ground, you need to use an industrial vacuum.

In controlling silica dust

When it comes to controlling silica dust, then using industrial dust collectors may be the best solution. This is because silica dust is highly volatile, and industrial dust collectors are made stronger, is more resilient, and can handle higher use. An industrial dust collector can also clean large areas and hold significant amounts of fine dust.

Silica dust is highly volatile and contains tons of harmful substances. As such, it is essential to have the right measures to control its emission. Dust collators are the best in this case, as they are designed to collect and control airborne dust.